ASIMOV CIRCUIT
Build. Navigate. Manipulate. Conquer the Arena.
About the Event
Get ready to explore the exciting world of robotics! Design and operate your own robot to navigate obstacles and complete a series of challenging tasks. Test your skills through object handling, precision movement, and exciting mechanical challenges. Bring your creativity, engineering knowledge, and problem-solving skills to the arena. Take the challenge and show what your robot can do!
General Guidelines
- A fixed maximum time limit will be provided to complete the challenge.
- Robot dimensions must not exceed 20 × 20 × 15 cm (tolerance: +1 cm; manipulator excluded).
Robot Parts Inclusion and Exclusion
- A 2-wheel or 4-wheel roving mechanism.
- A functional pick-and-place manipulator.
- Robots may be wired or wireless, but all operations must be manually controlled.
- Total weight must not exceed 4 kg, including the manipulator.
- LEGO parts and pre-built grippers are not permitted. Ready-made gear assemblies are allowed.
- The operating voltage of the robot must not exceed 12 V DC at any point. An AC power supply will be available for wired robots.
Format
Participants must design a manually controlled (wired or wireless) robot capable of navigating a designated arena, avoiding obstacles, and performing various challenges that may include picking up and placing lightweight blocks in designated zones, launching lightweight blocks, and transferring a ring along a wire, while maintaining full operational control.
Arena
- A 30 cm-wide clearance track will be provided.
- A 2 cm-wide red boundary line will be marked along both sides of the track. Touching or crossing these lines will incur penalties.
- Obstacles will be placed along the track, requiring careful navigation and precise robot control.
- Certain sections may include inclines of up to 30°.
Gameplay
- Robots must start from the designated starting zone and navigate through the track while avoiding obstacles.
- Robots may have to transport and place some cubes or cylinders while navigating inclined sections of the track.
- Robots may have to move a ring along a declined wire (with an inclination of up to 10°) using a holder attached to the ring, without touching the wire.
- Robots may have to pick up and place small-sized cylindrical objects at designated locations. The robot must remain stationary while picking up each cylinder.
- Robots may have to pick up and accurately place some cubes (approximately 5 × 5 × 5 cm) at designated locations. The robot must remain stationary while picking up each cube.
- Robots may have to launch lightweight cubes towards a designated distance-scoring area.
- Penalties may apply for collisions with cubes or obstacles, skipping checkpoints, going off the track, or damaging cubes or the arena.
- Leaving the arena will result in a full restart from the beginning.
- Any human intervention during the run will result in a restart from the last completed checkpoint. Previously completed placements will remain valid.
- The timer will continue running throughout the challenge and will not pause at any point.
- Only one team member may operate the robot. For wired robots, another team member may assist with cable management.
- Cubes must not be dragged or slid across the arena, although minor positional adjustments are allowed.
- Each participating team must bring and use its own robot. Sharing robots or robot components between different teams during the competition is strictly prohibited.
- Only the designated team operator is allowed to control the robot. No non-participant or third party may assist, guide, or instruct the operator during the run.
Final Decisions
All decisions made by the event authorities will be final.
Schedule
FAQs
No. The same gripper/manipulator used for pick-and-place must also be used for cube launching and ring transfer.
The ring-transfer challenge may be included as an optional challenge, as decided by the organizers.
The tie-breaking criteria will be announced by the organizers.
No. Objects must be handled using the robot, except where minor adjustments are explicitly permitted.
No. Both challenges may be optional. Teams that successfully complete either or both challenges may receive additional bonus points.
No. The robot must remain stationary while picking up each cube or cylinder.
Winners will be determined according to the final scoring system announced by the organizers.